MGate™ 5109 Series

Ethernet Interface: Protocol: Modbus TCP client/server, DNP 3.0 TCP/UDP master/outstation; Ports: 2 Ethernet ports (1 IP address); Speed: 10/100 Mbps, Auto MDI/MDIX; Connector: 8-pin RJ45; Isolation: Built-in 1.5 kV. Modbus Serial: Protocol: Modbus RTU/ASCII Master/Slave; Ports: 1; Serial Standard: RS-232/422/485, Software Selectable; Connector: DB9 Male; RS-485 Data Direction Control: ADDC® (Automatic Data Direction Control); RS-485 Pull High/Low Resistors: 1 kΩ, 150 kΩ; RS-485 Termination Resistor: 120 Ω; Isolation: Built-in 2 kV. Modbus Serial Communication Parameters: Data Bits: 7, 8; Stop Bits: 1, 2; Parity: None, Even, Odd, Space, Mark; Flow Control: RTS/CTS, RTS Toggle (RS-232 only); Baud Rate: 50 bps~921.6 kbps. Serial Signals: RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND; RS-422: Tx+, Tx-, Rx+, Rx-, GND; RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND; RS-485-2w: Data+, Data-, GND. Modbus Supported Functions: 1, 2, 3, 4, 5, 6, 15, 16, 23; Max Commands: 100; Max Connections: MGate as Modbus TCP Master: 32 slave connections; MGate as Modbus TCP Slave: 16 master connections. DNP3 Max Connections: Transparent Mode: 16 master connections or 32 outstation connections; Proxy Mode: MGate as DNP3 TCP/UDP Master: 32 out.