ioLogik E2214
Digital Input Input Channels: 6 Sensor Types: NPN, PNP and dry contact I/O Mode: DI or counter (up to 900 Hz) Dry Contact: Logic 0: short to GND; Logic 1: open Wet Contact: Logic 0: 0 ~ 3 VDC; Logic 1: 10 ~ 30 VDC Common Type: 6 points / 2 COM Isolation: 2 K VDC or 3 K Vrms Counter Frequency: 900 Hz Digital Filter Interval: 10 ms Overvoltage Protection: +36 VDC Store Relay Count: Yes Digital Output 6 channels, 5 A, Form A relay (normally open) Relay Specifications: Contact Rating: 5 A @ 30 VDC, 5 A @ 240 VAC, 5 A @ 110 VAC Inductive Load: 2 A Resistive Load: 5 A Dielectric Strength: 500 VAC Relay Close/Open Time: 10 ms, 5 ms (max) Insulation Resistance: 1 G min. @ 500 VDC Life: 100,000 cycles (typical) Contact Resistance: 30 m Ohm (max) Pulse Output: 20 pulses/min (resistive load) Isolation: 3 K VDC or 2 K Vrms LAN Ethernet: 10/100 Mbps, RJ45 Protection: 1.5 KV magnetic isolation Protocol: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, SNTP
Digital Input Input Channels: 6 Sensor Types: NPN, PNP and dry contact I/O Mode: DI or counter (up to 900 Hz) Dry Contact: Logic 0: short to GND; Logic 1: open Wet Contact: Logic 0: 0 ~ 3 VDC; Logic 1: 10 ~ 30 VDC Common Type: 6 points / 2 COM Isolation: 2 K VDC or 3 K Vrms Counter Frequency: 900 Hz Digital Filter Interval: 10 ms Overvoltage Protection: +36 VDC Store Relay Count: Yes Digital Output 6 channels, 5 A, Form A relay (normally open) Relay Specifications: Contact Rating: 5 A @ 30 VDC, 5 A @ 240 VAC, 5 A @ 110 VAC Inductive Load: 2 A Resistive Load: 5 A Dielectric Strength: 500 VAC Relay Close/Open Time: 10 ms, 5 ms (max) Insulation Resistance: 1 G min. @ 500 VDC Life: 100,000 cycles (typical) Contact Resistance: 30 m Ohm (max) Pulse Output: 20 pulses/min (resistive load) Isolation: 3 K VDC or 2 K Vrms LAN Ethernet: 10/100 Mbps, RJ45 Protection: 1.5 KV magnetic isolation Protocol: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, SNTP
Serial Interface
| RS-485 (2-wire): Data+, Data-, GND Protection: 15 KV ESD full signal protection Serial Communication Parameters Parity: None Data Bits: 8 Stop Bits: 1 Flow Control: None Speed: 1200 bps ~ 115200 bps Protocol: Modbus/RTU |
Power Requirements
| Input Voltage | 24 VDC typical, 12 ~ 48 VDC Field Power: 24 VDC typical, up to 30 VDC Mechanical Wiring: I/O cable max. 14 AWG |
|---|
Operating Environment
| Operating Temperature | -10 ~ 60 ยฐC (14 ~ 140 ยฐF) Operating Humidity: 5 ~ 95% RH Storage Temperature: -40 ~ 85 ยฐC (-40 ~ 185 ยฐF) Storage Humidity: 5 ~ 95% RH |
|---|
Software, Firmware & Drivers
| File Name | Type | Version | Operating System | Release Date |
|---|---|---|---|---|
| ioLogik-series-firmware-v4.1.rom | Firmware | v4.1 | โ | 2024-06-26 |
| ioLogik-series-mib-package-v4.1.zip | Software Package | v4.1 | โ | 2024-06-26 |
| ioLogik-series-eds-package-v1.0.zip | Software Package | v1.0 | โ | 2024-04-24 |
Support Documents
| File Name | Type | Version | Release Date |
|---|
Related Content
Need Help Choosing the Right Product?
Contact our engineering team for detailed specifications, pricing, and availability.