IEX-402-VDSL2 Series

Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow Control, IEEE 802.1p for Class of Service, ITU-T G.993.2 for Very high speed Digital Subscriber Line (VDSL2) transceivers. Protocols: SNMPv1/v2c/v3, DHCP Client, TFTP, SNTP, HTTP, Telnet, Syslog, LLDP, Modbus/TCP. MIB: MIB-II. Flow Control: IEEE 802.3x flow control, back pressure flow control. Switch Properties: MAC address table size: 1K, packet buffer size: 512K. Interfaces: DSL interface: RJ-11 (RJ-45 connector) or detachable 2-pin terminal block; RJ45 interface: 10/100BaseT(X) auto-sensing, full/half duplex mode, MDI/MDI-X auto-detection; Control port: RS-232 (RJ45 connector); DIP switches: Reset button, CO/CPE, SNR/SPEED, STD/TURBO; LED indicators: PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port). Power Requirements: Input voltage: 12/24/48 VDC (9.6 ~ 60 VDC), dual redundant inputs; Input current: 0.33 @ 24V; Overload protection: provided; Connection: 2 detachable 2-pin terminal blocks; Reverse polarity protection: provided. Mechanical: Housing: metal, IP30 protection; Dimensions: 35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in); Weight: 275 g; Installation: DIN rail, panel mounting (optional accessories); Operating altitude: up to 2000 m; Note: Contact Moxa for operation at higher altitudes. Environmental: Operating temperature: Standard model: -10 ~ 60 °C (14 ~ 140 °F); Wide temp model: -40 ~ 75 °C (-40 ~ 167 °F); Storage temperature.